Find Research outputs

Search results

• An assessment of using variable blade pitch for moored ocean current turbine flight control

  VanZwieten, J. H., Pyakurel, P., Ngo, T., Sultan, C. & Xiros, N. I., 1 Apr 2016, In: International Journal of Marine Energy. 13, p. 16-26 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Anatomy of Light: (Group Exhibition 'Beyond the Frame')

  Slevin, T., Oct 2016

  Research output: Non-textual form › Exhibition

• An autoethnographic study of realist knowledge translation within sport development

  Bailey, A. & Harris, K., 18 May 2020, In: Managing Sport and Leisure. 26, 1-2, p. 41-59 19 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File
  42 Downloads (Pure)

• Anchoring the Experience of Highly Diverse Students on the EMship+ Master: All Aboard!

  Souppez, J-B. R. G., 23 Jun 2018, In: Dialogue: Journal of Learning and Teaching. 2017/2018, 1

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File
  13 Downloads (Pure)

• Andrew Mansfield: recent paintings

  Mansfield, A., 1 Jun 2005

  Research output: Non-textual form › Exhibition

• A neck strengthening protocol in adolescent males and females for athletic injury prevention.

  Fisher, J., Asanovich, M., Raplh, C. & Steele, J., 2016, In: Journal of Trainology. 5, 1, p. 13-17

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File
  49 Downloads (Pure)

• An Empirical Analysis of Software Productivity

  Mair, C., Shepperd, M. & Forselius, P., 2006, 3rd Software Measurement European Forum (SMEF '06), May 2006, Rome.

  Research output: Chapter in Book/Report/Published conference proceeding › Conference contribution › peer-review

  Open Access

  File
  5 Downloads (Pure)

• An Empirical Study Of A Comparison Of The Failure Modes Of Two Polymeric Materials Cut Using Different Manufacturing Methods

  Benham, R. & Rehman, F., 2011.

  Research output: Published contribution to conference › Paper › peer-review

• An Empirical Study of Software Project Managers Using a Case-Based Reasoner

  Mair, C. & Shepperd, M., 1 Jan 2012, European Institute for Advanced Studies in Management, 25-26 June 2012, London, UK.

  Research output: Chapter in Book/Report/Published conference proceeding › Conference contribution › peer-review

  Open Access

  File
  5 Downloads (Pure)

• An Enhanced Cognitive Femtocell Approach for Co-Channel Downlink Interference Avoidance

  Khwandah, S., Dec 2016, In: IEEE Wireless Communications. 23, 6

  Research output: Contribution to journal › Article › peer-review

  Open Access

• An Ethical Approach to Marketing and Valorisation

  Rahanu, H., Georgiadou, E., Siakas, K., Ross, M. & Bouboulas, A., 23 Jun 2017, ICCMI (International Conference on Contemporary Marketing Issues) 2017, . Thessaloniki, Greece

  Research output: Chapter in Book/Report/Published conference proceeding › Conference contribution › peer-review

• A New Approach for Determining Quiet Area Accessibility in England

  Battaner-Moro, J., Barlow, C., Wright, P. & Whitelegg, N., May 2011, Proceedings of Springnoise 2011.

  Research output: Chapter in Book/Report/Published conference proceeding › Conference contribution › peer-review

  Open Access

  File
  19 Downloads (Pure)

• A new approach to predicting listener's preference based on acoustical parameters: Paper 10378, (2020 May).

  Ausiello, L. & Chritchell, P., 28 May 2020.

  Research output: Published contribution to conference › Paper › peer-review

• A new insight in the SMEs internationalization process

  Costa, E., Soares, A. L. & De Sousa, J. P., 2015, Risks and Resilience of Collaborative Networks. Camarinha-Matos, L., Bénaben, F. & Picard, W. (eds.). Cham: Springer International Publishing AG, p. 398-410 13 p. (IFIP Advances in Information and Communication Technology; vol. 463).

  Research output: Chapter in Book/Report/Published conference proceeding › Chapter › peer-review

  Open Access

  File
  73 Downloads (Pure)

• A new test to measure attentional bias and cognitive disinhibition in drinkers, based on the Hayling task.

  Mason-Li, Y. M., Rose, A., Nicholas, D. & Hobbs, M., 2010, In: Alcohol and Alcoholism. 45, 6, p. 501-506 5 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File
  35 Downloads (Pure)

• A new view on regional sea level scenarios: The case of the United Kingdom

  Kantamaneni, K. & Hornby, K., 2017, 13th International Conference on Interdisciplinary Social Sciences.

  Research output: Chapter in Book/Report/Published conference proceeding › Conference contribution

• An examination of the key benefits of assigning stable or fluid crews within the Merchant Shipping Industry: The Effective Crew Project

  Pike, K., Butt, N., Broadhurst, E., Passman, K. & Wincott, C., 9 Sep 2019, Solent University. 55 p.

  Research output: Book/Report › Other report › peer-review

  Open Access

  File
  15 Downloads (Pure)

• An Expandable, Contextualized and Data-Driven Indoor Thermal Comfort Model

  Sajjadian, S. M., Jafari, M. & Pekaslan, D., 11 May 2020, In: Energy and Built Environment. 1, 4, p. 385-392

  Research output: Contribution to journal › Article › peer-review

  Open Access

• An Experimental Study on Vibration Propagation of High-speed Railway Integrated Transportation Hub Station Structure

  Zhang, L., Lei, X., Feng, Q., Jiang, J. & Cui, C., 2019, (Accepted/In press) In: Zhongguo Kexue Jishu Kexue/Scientia Sinica Technologica.

  Research output: Contribution to journal › Article › peer-review

• An exploration into aesthetic association of product form

  Jones, M., 1 Dec 2007, Design & Semantics of Form & Movement 2007, December 2007, Newcastle University.

  Research output: Chapter in Book/Report/Published conference proceeding › Conference contribution › peer-review

  Open Access

  File
  13 Downloads (Pure)

• An exploration of intersex characters in Indian cinema

  Qureshi, K., 5 Sep 2022, In: Jump Cut: A Review of Contemporary Media.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• An exploration of students’ voices on the English graduation benchmark policy across Northern, Central and Southern Vietnam

  Pham, T. N. & Bui, L. T. P., 3 Sep 2019, In: Language Testing in Asia. 9, 15

  Research output: Contribution to journal › Article › peer-review

  Open Access

• An exploratory investigation examining male and female students' initial impressions and expectancies of lecturers

  Wright, J., Batten, J., Birch, P., Manley, A. & Smith, M., 2014, In: Teaching in Higher Education. 19, 2, p. 113-125

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File
  47 Downloads (Pure)

• Anglia Film Studios Project

  Qureshi, K., 31 Jul 2022, (Unpublished) University of East Anglia.

  Research output: Book/Report › Commissioned report › peer-review

• An illuminating exhibition of new work from the legendary Jonny Hannah: Exhibition held at The Tom Paine Printing Press and Gallery, Lewes.

  Hannah, J., 1 Feb 2010

  Research output: Non-textual form › Exhibition

• An industrial application of the SMED methodology and other Lean Production tools

  Costa, E., Sousa, R., Braganca, S. & Alves, A., Jul 2013. 8 p.

  Research output: Published contribution to conference › Paper › peer-review

  Open Access

  File
  14 Downloads (Pure)

• An Informal Carer Hub to support carers looking after COPD patients in UK and Netherlands

  Sobnath, D. & Philip, N., 2 Oct 2019, 5th International Conference on Information System Design and Intelligent Applications INDIA (2018). Springer Singapore, Vol. 1014. ( Frontiers in Intelligent Computing: Theory and Applications. Advances in Intelligent Systems and Computing; vol. 1014).

  Research output: Chapter in Book/Report/Published conference proceeding › Conference contribution › peer-review

  Open Access

  File
  119 Downloads (Pure)

• An Interactive Multimedia Experience: A Case Study

  Horsburgh, A., 2015.

  Research output: Published contribution to conference › Paper › peer-review

• An Interdisciplinary Approach to Education: Case Study of an Academic Exchange

  Souppez, J-B., 20 Sep 2016. 8 p.

  Research output: Published contribution to conference › Paper › peer-review

• An International Collaborative Approach to Supporting the International Learner

  Monger, A., 1 Apr 2008, BCS SQM Inspire.

  Research output: Chapter in Book/Report/Published conference proceeding › Conference contribution › peer-review

  Open Access

  File
  34 Downloads (Pure)

• An introduction to the state-of-the-art review of social network-based manufacturing system: Social network analysis definitions, terminology and application areas

  Costa, E. & Putnik, G., 2014.

  Research output: Published contribution to conference › Paper › peer-review

  Open Access

  File
  30 Downloads (Pure)

• An investigation into Additive Manufacturing materials subjected to shear failure

  Benham, R. & Rehman, F., 11 Sep 2018.

  Research output: Published contribution to conference › Paper › peer-review

• An investigation into Additive Manufacturing material tensile properties for different build orientations of parts

  Benham, R. & Rehman, F., 2017.

  Research output: Published contribution to conference › Paper › peer-review

• An Investigation Into The Effects Of Heat Loss In A Falling Sphere Viscometer When Testing The Changes In Viscosity Of Sugar Solution

  Benham, R. & Rehman, F., 2015.

  Research output: Published contribution to conference › Paper › peer-review

• An Investigation into the Exploratory Use of Additively Manufactured Vanes Subjected to the Impact of a Water Jet Experiment

  Rehman, F. & Benham, R., 9 Sep 2019, Advances in Manufacturing Technology XXXIII. Jin, Y. & Price, M. (eds.). IOS Press, p. 232-237 (Advances in Manufacturing Technology).

  Research output: Chapter in Book/Report/Published conference proceeding › Conference contribution › peer-review

• An investigation into the exploratory use of additive manufacturing in weir design and open channel flow

  Benham, R. & Rehman, F., 10 Sep 2021, Advances in Manufacturing Technology XXXIV: Proceedings of the 18th International Conference on Manufacturing Research, incorporating the 35th National Conference on Manufacturing Research, 7-10 September 2021, University of Derby, Derby, UK. Shafik, M. & Case, K. (eds.). IOS Press, Vol. 15. p. 85-90 (Advances in Transdisciplinary Engineering).

  Research output: Chapter in Book/Report/Published conference proceeding › Conference contribution

  Open Access

• An investigation into the logistics and management of uncontaminated soil exchange in the Southern region of the UK

  Marasini, R., Bralee, S., Brown, P. & Price, D. A., 1 Feb 2012, 101 p.

  Research output: Working paper/Preprint › Working paper

  Open Access

  File
  5 Downloads (Pure)

• An investigation into the seafarers’ perception towards higher education and identifying, what motivates them to remain in continued learning?

  Anand, K., 26 May 2016.

  Research output: Published contribution to conference › Other › peer-review

• An investigation into the sensory properties of materials

  Jones, M., Zuo, H., Castle, P. & Hope, T., 1 Jun 2001, The Second International Conference on Affective Human Factors Design, Singapore 27-29 June 2001., Published by Asean Academic Press, London. London: Asean Academic Press, p. 500-507 8 p.

  Research output: Chapter in Book/Report/Published conference proceeding › Conference contribution › peer-review

• An Investigation into the Use of Additively Manufactured Components to Reduce Assembly Part Count and De-Risk Radar System Development Projects

  Rehman, F., Fisher, A. & Laight, A., 9 Sep 2019, Advances in Manufacturing Technology XXXIII. Jin, Y. & Price, M. (eds.). IOS Press, p. 244-249

  Research output: Chapter in Book/Report/Published conference proceeding › Conference contribution › peer-review

• An Investigation into Utilizing Opto-Sensors to Function as Parts of MIDI Controllers

  Horsburgh, A., 2015.

  Research output: Published contribution to conference › Paper › peer-review

• An investigation of machine learning based prediction systems

  Mair, C., Kadoda, G., Lefley, M., Phalp, K., Schofield, C., Shepperd, M. & Webster, S., 15 Jul 2000, In: Journal of Systems and Software. 53, 1, p. 23-29 7 p.

  Research output: Contribution to journal › Article › peer-review

• An Investigation of Rule Induction Based Prediction Systems

  Mair, C. & Shepperd, M., 1 May 1999, 21st International Conference on Software Engineering (ICSE), May 1999, Los Angeles, USA..

  Research output: Chapter in Book/Report/Published conference proceeding › Conference contribution › peer-review

  Open Access

  File
  6 Downloads (Pure)

• Anisotropies in the perceived slant of ceiling, ground and wall planes

  Josephs, J., Adams, W., Graf, E. & Elder, J., 2009.

  Research output: Published contribution to conference › Poster

• An mHealth Intervention Using a Smartphone App to Increase Walking Behavior in Young Adults: A Pilot Study

  Walsh, J. C., Corbett, T., Hogan, M., Duggan, J. & McNamara, A., 22 Sep 2016, In: JMIR Mhealth Uhealth (JMU). 4, 3, e109.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• An obsession with beauty is a sign of a declining culture

  Barnett, E., 2014, (Re)Possessing Beauty: Politics, Poetics, Change. Mcnamara, S. (ed.). Inter-Disciplinary Press

  Research output: Chapter in Book/Report/Published conference proceeding › Chapter › peer-review

• An online Master's Degree: Teaching and Learning strategy vs Managerial constraints

  Doig, A. & Pekcan, C., 9 Jul 2015.

  Research output: Published contribution to conference › Other › peer-review

• An optimal value for 100 000-dimensional Michalewicz test: Fmax=99106.353407791452. Estimated precision 99%

  Penev, K., 24 Jun 2022, (Unpublished) 380 p.

  Research output: Other contribution

  File
  48 Downloads (Pure)

• A novel approach to evaluating sustainability of products and associated manufacturing processes

  Pyakurel, P., Rehman, F. & Benham, R., 8 Nov 2022, Advances in Manufacturing Technology XXXV: Proceedings of the 19th International Conference on Manufacturing Research, Incorporating the 36th National Conference on Manufacturing Research, 6–8 September 2022, University of Derby, Derby, UK. Shafik, M. & Case, K. (eds.). IOS Press, Vol. 25. p. 239-244 (Advances in Transdisciplinary Engineering).

  Research output: Chapter in Book/Report/Published conference proceeding › Conference contribution

  Open Access

• A Novel Approach to Grading and Generating Feedback for Practical Assessments

  Bourne, P. & Lancastle, S., 2016.

  Research output: Published contribution to conference › Paper › peer-review